Side-by-side comparison showing a lift interior and an escalator.

Elevator and Escalator Cleaning: The Ultimate Guide in 2026

Last Modified : September 10, 2025

Elevators and escalators are some of the most frequently used shared areas in commercial buildings. Buttons, handrails, doors, steps and landing areas can collect fingerprints, dust, grit, spills and other surface contamination throughout the day.

Cleaning them properly requires more than wiping visible surfaces. Elevators contain sensitive control panels, door systems and finishes, while escalators combine moving steps, handrails, comb plates and narrow grooves that can be difficult to clean safely.

This guide explains what elevator and escalator cleaning involves, which components require attention, how professional cleaning is carried out, what equipment is used and when specialist cleaning may be needed.

It also separates routine commercial cleaning from mechanical maintenance, an important distinction for facility and property managers.

Lifts and escalators are usually cleaned as part of a wider office building cleaning scope that also covers lobbies, hallways and shared areas.

What Is Elevator and Escalator Cleaning?

Elevator and escalator cleaning is the controlled cleaning of passenger-facing surfaces, floors, steps, handrails, doors, panels and surrounding areas without interfering with the equipment’s mechanical or electrical systems.

For elevators, also called lifts, cleaning generally focuses on:

  • Internal walls and doors
  • External landing doors
  • Control buttons and panels
  • Handrails
  • Mirrors and glass
  • Floors
  • Door sills and accessible tracks
  • Stainless-steel and decorative finishes

Escalator cleaning is more specialised because the equipment contains continuously linked moving steps and several narrow interfaces. Cleaning can include:

  • Step treads
  • Step risers
  • Handrails
  • Balustrades
  • Skirt panels
  • Comb plates
  • Landing areas
  • Accessible grooves and edges

KONE identifies elevator buttons, handrails, car walls, doors and touch-screen panels as surfaces that require regular cleaning, while Schindler similarly highlights buttons, doors, walls and handrails as common high-contact areas.

Cleaning should remain separate from servicing, repair or access to internal machinery. Lifts and escalators are powered plant, so work involving their mechanical or electrical systems requires appropriate controls and competent personnel.

Why Do Elevators and Escalators Need Specialised Cleaning?

Elevators and escalators need specialised cleaning because they combine high passenger traffic, complex surface materials, narrow moving components and sensitive electrical equipment.

A general floor or surface-cleaning method may not be suitable for every part of the equipment.

The main reasons specialised cleaning is important include:

  1. High contact frequency: Buttons and handrails are repeatedly touched by building occupants and visitors.
  2. Heavy foot traffic: Dirt, grit and moisture can be transferred onto elevator floors and escalator steps from footwear.
  3. Detailed surfaces: Escalator tread grooves, risers and comb areas are harder to clean than standard flooring.
  4. Mixed materials: Stainless steel, glass, rubber, painted metal and electronic panels may require different products.
  5. Moving equipment: Escalators contain moving steps and other mechanical interfaces that create additional safety requirements.
  6. Electrical components: Excess moisture around buttons, displays and control panels can create unnecessary risk.
  7. Building presentation: Elevators and escalators are highly visible areas in offices, shopping centres, hotels, hospitals and other commercial buildings.

Schindler notes that heavily soiled escalator steps can become greasy and slippery and recommends periodic step cleaning based on the environment in which the equipment operates.

Which Parts of an Elevator and Escalator Need Cleaning?

Which Parts of an Elevator and Escalator Need Cleaning

Different components collect different types of soil. A useful cleaning plan therefore separates high-touch surfaces, floor-level dirt, detailed grooves and decorative finishes.

ComponentCommon Cleaning IssueTypical Cleaning Approach
Elevator doorsFingerprints, marks, dustSurface-compatible wiping and detailing
Control buttonsFingerprints and frequent hand contactControlled low-moisture cleaning
Mirrors and glassSmears and fingerprintsGlass-safe cleaning
Elevator floorsDust, grit, spillsVacuuming, mopping or floor-specific cleaning
Door sillsDust, fibres and small debrisVacuuming and careful detail cleaning
Escalator stepsEmbedded dirt, grease and gritSpecialist brushing or step-cleaning equipment
Escalator handrailsHand contact and surface marksManufacturer-compatible surface cleaning
Comb platesDust and trapped debrisControlled detail cleaning
BalustradesFingerprints and dustGlass or surface-specific cleaning

Elevator Doors, Walls and Stainless-Steel Surfaces

Elevator doors and walls should be cleaned according to the material and finish rather than with one universal chemical.

Stainless steel commonly shows fingerprints, streaks, grease and splash marks. Cleaning normally involves removing loose dust first and then wiping the surface with a compatible product and microfibre cloth.

For brushed stainless steel, cleaning in the direction of the grain can help reduce visible streaking.

Painted panels, laminates and coated metal may require milder products. Abrasive pads should not be used unless the manufacturer specifically approves them because they can alter decorative finishes.

Buttons, Control Panels and Handrails

Buttons, control panels and handrails are priority areas because passengers touch them repeatedly throughout the day.

KONE specifically recommends regular cleaning of elevator buttons, handrails, walls, doors and touch-screen panels using suitable products.

Cleaning these components requires controlled moisture. Liquid should normally be applied to the cleaning cloth rather than sprayed heavily towards a button panel or electronic display.

Priority areas include:

  • Call buttons outside the elevator
  • Floor-selection buttons
  • Door-open and door-close buttons
  • Emergency-control surrounds
  • Touch screens
  • Internal handrails
  • Escalator handrails

The required frequency should reflect passenger traffic and the building’s hygiene plan rather than a single fixed schedule.

Mirrors, Glass and Interior Panels

Elevator mirrors, glass and decorative panels should be cleaned to remove fingerprints, smears and surface dust without leaving residue.

Elevator interiors are compact spaces, so marks on reflective surfaces are highly visible.

Suitable cleaning should cover:

  • Mirrors
  • Glass wall panels
  • Decorative inserts
  • Display surrounds
  • Stainless-steel trims
  • Accessible lighting surrounds

Products should be compatible with adjacent materials. Overspray onto buttons, door openings or electrical fittings should be avoided.

Elevator Floors, Door Sills and Tracks

Elevator floors and accessible door sills collect dirt carried into the lift from surrounding walkways.

Regular floor cleaning may involve:

  1. Removing loose debris.
  2. Vacuuming corners and floor edges.
  3. Cleaning according to the floor material.
  4. Treating visible spills or marks.
  5. Drying the floor before normal passenger use.

Door sill grooves require particular attention because small debris can accumulate in them. Schindler advises building operators to check for foreign material or obstructions in elevator door sill grooves when investigating door-closing problems.

Cleaning staff should remove only accessible debris. Problems involving door operation should be referred to the elevator maintenance provider.

Escalator Steps, Treads and Risers

Escalator steps require detailed cleaning because dirt becomes embedded in the grooves of the tread and along the vertical riser.

The tread is the horizontal surface passengers stand on. The riser is the vertical face between steps.

Common contamination includes:

  • Dust
  • Sand
  • Grit
  • Mud
  • Grease
  • Drink spills
  • Shoe residue
  • Small debris

Basic surface cleaning may remove loose material, but heavily soiled grooves often require specialist escalator step-cleaning equipment.

Schindler Australia describes a professional process that cleans both the tread and riser while the steps remain installed. Its service is performed outside normal business hours, and the company recommends planned periodic cleaning based on the escalator’s operating environment.

Escalator Handrails

Escalator handrails require frequent surface cleaning because users are encouraged to hold them for safe travel.

KONE advises passengers to hold the handrail when using an escalator and also describes automatic handrail sanitation systems designed to treat the handrail continuously.

Manual cleaning should use a product compatible with the specific handrail material.

The goal is to remove:

  • Body oils
  • Dust
  • Surface grime
  • Sticky residue
  • Visible marks

The handrail should be left clean and dry without leaving a slippery residue.

Comb Plates, Skirt Panels and Landing Areas

Comb plates, skirt panels and landing areas should be kept free from visible soil and loose debris because they sit immediately beside moving escalator components.

The comb plate is located where the moving steps enter or leave the landing. The skirt panel runs along the side of the steps.

Schindler identifies the comb-plate area and step-to-skirt interface as important escalator safety zones.

Cleaning staff should not insert tools, fingers or equipment into inaccessible mechanical openings. Material that cannot be removed safely from an accessible surface should be referred to the site’s escalator service provider.

Balustrades, Glass Panels and Exterior Surfaces

Escalator balustrades and glass panels require routine cleaning to maintain visibility and presentation.

These areas commonly collect:

  • Fingerprints
  • Dust
  • Smears
  • Drink splashes
  • General surface marks

Glass panels can generally be cleaned using a suitable glass-cleaning system. Stainless-steel trims and painted components require products appropriate to their finish.

The lower sections may require more frequent attention because they are exposed to dirt from shoes, bags and nearby flooring.

What Is the Difference Between Elevator Cleaning and Escalator Cleaning?

Elevator cleaning mainly involves fixed internal surfaces, while escalator cleaning involves both fixed surfaces and complex moving-step components.

FactorElevator CleaningEscalator Cleaning
Main surfacesWalls, doors, buttons, mirrors, floorsSteps, risers, handrails, skirts, comb plates, balustrades
Main soilFingerprints, dust, floor dirt, spillsGrit, grease, embedded dirt and handrail residue
Equipment complexityMostly enclosed fixed passenger surfacesMoving step and handrail system
Detailed cleaningDoor sills, corners and control surroundsTread grooves, risers, comb areas and edges
Specialist machineryUsually limitedOften useful for deep step cleaning
Safety controlsProtect controls and manage accessAdditional controls around moving plant
Maintenance boundaryDo not access shaft, pit or control equipmentDo not access truss, drive or internal step mechanisms

Elevator cleaning often fits within a regular commercial cleaning program. Escalator cleaning can require dedicated machinery and planned shutdown periods, particularly when the step treads and risers need deep cleaning.

How Is an Elevator Professionally Cleaned?

A professional elevator cleaning process should follow a consistent sequence so that dry debris is removed before wet cleaning begins.

Inspect and Prepare the Elevator

The first step is to inspect the elevator surfaces and identify any cleaning restrictions, damage or maintenance concerns.

The cleaner should check:

  • Floor type
  • Wall and door finish
  • Stainless-steel grain
  • Glass and mirror areas
  • Electronic panels
  • Visible spills
  • Loose debris
  • Door sill condition
  • Building access requirements

Any operational problem should be reported rather than treated as a cleaning issue.

Where required by the building’s procedure, the lift may need to be temporarily controlled or removed from normal passenger use while certain cleaning tasks are completed.

Remove Loose Dust and Debris

Dry soil should be removed before applying cleaning products.

This prevents dust and grit from being moved around during wet cleaning.

Typical tasks include:

  • Vacuuming floors
  • Vacuuming corners
  • Removing debris around accessible door sills
  • Dusting upper surfaces
  • Removing loose material from floor edges

Particular care is required around door openings and electrical components.

Clean Doors, Walls, Mirrors and Interior Surfaces

Clean the elevator interior according to each surface material.

The process may include:

  1. Cleaning interior doors.
  2. Wiping wall panels.
  3. Removing fingerprints from stainless steel.
  4. Cleaning mirrors and glass.
  5. Detailing trims and edges.
  6. Removing isolated marks where the finish allows.

Cleaning from higher surfaces towards the floor can reduce the need to reclean lower areas.

Clean High-Touch Buttons and Handrails

Buttons and handrails should be cleaned using a low-moisture method and a compatible product.

The cloth should be damp rather than saturated.

Avoid allowing cleaning liquid to run:

  • Behind control buttons
  • Into panel edges
  • Around electrical displays
  • Into door mechanisms

KONE recommends cleaning buttons, handrails, walls, doors and touch-screen panels regularly with suitable products.

Clean Floors, Door Sills and Tracks

Floor cleaning should be completed after upper surfaces so that loosened soil can be removed at the end of the process.

The method depends on whether the elevator has:

  • Vinyl flooring
  • Tile
  • Stone
  • Rubber flooring
  • Carpet
  • Another commercial floor finish

Door sill grooves can be vacuumed or carefully detailed where they are safely accessible.

Cleaning staff should not dismantle doors or remove equipment covers to reach deeper components.

Inspect the Elevator After Cleaning

The final inspection confirms that surfaces are dry, debris has been removed and the lift is ready for normal use.

Check for:

  • Wet or slippery flooring
  • Streaked mirrors
  • Stainless-steel smears
  • Missed fingerprints
  • Residue on buttons or handrails
  • Debris near the doors
  • Equipment accidentally left inside

Any unusual noise, damaged component or operational problem noticed during cleaning should be reported to building management or the elevator service provider.

How Is an Escalator Professionally Cleaned?

Escalator cleaning requires more controlled planning because cleaning takes place around powered moving equipment.

How Is an Escalator Professionally Cleaned?

Inspect and Secure the Cleaning Area

The escalator and surrounding area should be assessed before cleaning begins, with public access controlled where required.

The cleaner should inspect:

  • Step condition
  • Tread grooves
  • Risers
  • Handrails
  • Comb plates
  • Landing areas
  • Skirt panels
  • Balustrades
  • Nearby flooring

Safe Work Australia requires risks associated with plant to be identified and controlled, while manufacturer guidance emphasises preventing unauthorised interference with moving equipment.

Specialist step cleaning is commonly planned outside operating hours to reduce disruption and allow the work area to be controlled. Schindler Australia states that its escalator step-cleaning process is performed after normal business hours.

Remove Loose Dirt and Debris

Loose dirt should be removed before deep cleaning starts.

This may include:

  • Vacuuming landing areas
  • Removing dust around accessible edges
  • Removing loose grit from step surfaces
  • Cleaning surrounding flooring
  • Removing visible debris from accessible comb areas

Cleaners should not reach inside inaccessible openings or remove escalator components.

Deep Clean Escalator Steps and Treads

Deep cleaning targets dirt embedded within the ridged tread and riser surfaces.

Specialist machines may use controlled brushing and extraction to clean the grooves more effectively than manual wiping.

Schindler Australia’s escalator-cleaning process demonstrates that treads and risers can be professionally cleaned while the steps remain installed rather than being physically removed for washing.

The exact method should still match the escalator model, site procedure and equipment manufacturer’s requirements.

Clean Handrails and High-Touch Surfaces

Handrails should be cleaned without leaving excessive moisture or slippery chemical residue.

Cleaning should cover the accessible handrail surface and nearby high-touch areas.

Automatic sanitising technologies also exist. KONE and Schindler both offer systems that treat escalator handrails while the equipment operates, but these are engineered equipment solutions rather than substitutes for an improvised manual cleaning method.

Clean Comb Plates, Skirt Panels and Balustrades

Fixed escalator surfaces can then be detailed using material-compatible methods.

Typical areas include:

  • Comb plates
  • Skirt panels
  • Glass balustrades
  • Stainless-steel trims
  • Outer panels
  • Newel areas
  • Landing plates

Extra caution is required anywhere a fixed component meets a moving component.

Inspect the Escalator After Cleaning

Inspect the escalator before reopening the area to normal passenger traffic.

Check that:

  • Steps are free from loose debris.
  • Handrails are dry.
  • No cleaning equipment remains near the escalator.
  • Landing areas are dry.
  • Cleaning residue has been removed.
  • Comb areas are unobstructed.
  • Barricades are removed only when the area is ready.

Cleaning personnel should report mechanical concerns rather than attempting repairs.

What Equipment and Cleaning Products Are Used for Elevator and Escalator Cleaning?

Professional cleaning uses different equipment for fixed surfaces, detailed grooves, high-touch areas and escalator steps.

The exact equipment depends on the surface, level of soil and manufacturer requirements.

Elevator-Safe Surface Cleaning Products

Elevator cleaning may require separate products for:

  • Stainless steel
  • Glass and mirrors
  • Painted metal
  • Laminate
  • Rubber
  • Vinyl
  • Stone
  • Carpet

A product suitable for one surface may damage another.

Products should therefore be selected based on:

  1. Surface material.
  2. Manufacturer guidance.
  3. Required cleaning task.
  4. Chemical safety information.
  5. Building-specific requirements.

Safe Work Australia advises businesses to identify and control hazards associated with workplace chemicals, including cleaning chemicals.

Escalator Step and Tread Cleaning Machines

Escalator step-cleaning machines are designed to clean the narrow grooves of step treads and risers more effectively than standard floor equipment.

Depending on the system, equipment may use:

  • Specialist brushes
  • Controlled cleaning solution
  • Soil agitation
  • Recovery or extraction
  • Low-moisture cleaning

Professional equipment can allow steps to be cleaned while they remain installed. Schindler Australia documents this type of in-place cleaning for both treads and risers.

The machine must be suitable for the escalator and used according to its operating instructions.

Vacuums, Brushes and Detail-Cleaning Tools

Detail tools are useful for accessible areas where larger equipment cannot reach.

Common equipment includes:

  • Commercial vacuum cleaners
  • Crevice tools
  • Soft detailing brushes
  • Microfibre cloths
  • Non-abrasive pads
  • Floor tools
  • Glass-cleaning equipment

Tools should never be pushed into moving machinery or inaccessible internal equipment.

Microfibre and Low-Moisture Cleaning Equipment

Low-moisture methods are particularly useful around buttons, display panels and other areas close to electrical components.

Microfibre cloths help control the amount of liquid applied to the surface.

This is important because water and electricity introduce additional workplace risk. Safe Work Australia notes that electrical risk increases in wet environments.

How Often Should Elevators and Escalators Be Cleaned?

Cleaning frequency should be based on passenger volume, building type, visible soil, environmental exposure and manufacturer recommendations.

There is no single schedule suitable for every commercial property.

How Often Should Elevators and Escalators Be Cleaned

A practical starting framework is:

Cleaning TaskTypical Planning Approach
Elevator buttonsDaily or more frequently in high-traffic buildings
Elevator handrailsDaily or according to site hygiene requirements
Elevator floorsAs part of routine daily commercial cleaning
Doors and interior panelsRoutine cleaning based on visible marks and traffic
Door sillsRegular inspection and detail cleaning
Escalator handrailsFrequent routine cleaning
Escalator landing areasRoutine daily cleaning
Escalator stepsPlanned periodic cleaning based on soil accumulation
Escalator deep cleaningScheduled according to traffic and operating environment

This is a planning guide rather than a manufacturer-specific schedule. KONE recommends regular cleaning of frequently touched elevator surfaces, while Schindler recommends planning escalator step cleaning according to the environment in which the equipment operates.

Daily High-Touch Surface Cleaning

High-touch areas usually require the most frequent attention.

These include:

  • Elevator buttons
  • Call panels
  • Internal handrails
  • Escalator handrails
  • Frequently touched glass or stainless-steel areas

Busy facilities such as shopping centres, hospitals, transport facilities and large office buildings may need these surfaces cleaned several times during operating hours depending on their hygiene program.

Routine Elevator and Escalator Cleaning

Routine cleaning controls the dirt generated by normal daily use.

A routine program may cover:

  • Elevator floors
  • Interior walls
  • Doors
  • Mirrors
  • External call panels
  • Escalator balustrades
  • Landing areas
  • Skirt panel surfaces
  • Surrounding flooring

The frequency should increase when passenger traffic increases.

Periodic Deep Cleaning

Deep cleaning is used when routine wiping and vacuuming no longer remove accumulated soil.

This is particularly important for:

  • Escalator tread grooves
  • Escalator risers
  • Heavily marked elevator walls
  • Detailed stainless-steel finishes
  • Door sill grooves
  • Floor edges and corners

Manufacturer guidance supports scheduled escalator step cleaning according to operating conditions rather than waiting until heavy contamination becomes severe.

Factors That Determine Cleaning Frequency

Cleaning frequency should consider:

  • Daily passenger numbers
  • Building operating hours
  • Indoor or outdoor exposure
  • Weather conditions
  • Dirt entering from car parks or streets
  • Nearby construction work
  • Food and drink traffic
  • Building hygiene requirements
  • Type of commercial facility
  • Surface colour and finish
  • Manufacturer guidance
  • Previous soil buildup

A shopping centre escalator near an external entrance, for example, may collect more grit than an escalator located inside a controlled office environment.

What Safety Precautions Are Required When Cleaning Elevators and Escalators?

Cleaning must protect workers, passengers and the equipment itself. The cleaning method should never require an unqualified cleaner to interfere with mechanical or electrical components.

Safe Work Australia treats lifts, escalators and moving walkways as plant and requires workplace risks associated with plant to be managed appropriately.

Follow the Equipment Manufacturer’s Cleaning Instructions

Manufacturer instructions should take priority over generic cleaning advice.

Different elevators and escalators use different:

  • Surface finishes
  • Control systems
  • Handrail materials
  • Step designs
  • Sensors
  • Electronic displays

Facility managers should confirm any cleaning restrictions with the lift or escalator service provider when necessary.

Use Surface-Compatible Cleaning Products

Cleaning products must match the material being cleaned.

Avoid assuming that a strong multipurpose cleaner is suitable for every component.

Incorrect products may:

  • Leave residue
  • Streak stainless steel
  • Damage coatings
  • Mark rubber handrails
  • Affect painted finishes
  • Damage sensitive screens

Always follow product labels, safety data and applicable workplace chemical procedures.

Prevent Water and Chemicals From Entering Electrical Components

Do not flood or heavily spray buttons, displays, switches or electrical panels. Use controlled moisture.

Apply cleaning product to the cloth where appropriate instead of directing excessive spray at electrical components.

Safe Work Australia identifies wet environments as a factor that can increase electrical risk.

Control Public Access During Cleaning

The cleaning area should be controlled whenever the task creates a risk to passengers.

Possible controls include:

  • Temporary barriers
  • Warning signage
  • Closing the elevator temporarily
  • Taking the escalator out of passenger use where required
  • Scheduling deep cleaning after business hours

Professional escalator step cleaning is commonly scheduled outside operating hours. Schindler Australia specifically describes carrying out its step-cleaning service after normal business hours.

Keep Cleaning Work Separate From Mechanical Maintenance

Commercial cleaners should clean accessible passenger-facing surfaces, not repair or dismantle the transport system.

Cleaning should not involve unauthorised access to:

  • Elevator shafts
  • Elevator pits
  • Machine rooms
  • Electrical cabinets
  • Internal door mechanisms
  • Escalator trusses
  • Drive systems
  • Step chains
  • Internal rollers or machinery

Safe Work Australia requires plant to be used safely and protected against unauthorised alteration or interference.

Mechanical faults should be referred to a qualified elevator or escalator technician.

What Problems Can Poor Elevator and Escalator Cleaning Cause?

Poor cleaning can lead to visible dirt, persistent odours, slippery residue, embedded step contamination, poor building presentation and unnecessary interference with equipment surfaces.

Common problems include:

  • Fingerprints covering doors and panels
  • Dirty mirrors and glass
  • Grit collecting in elevator floor edges
  • Debris accumulating around accessible door sills
  • Escalator tread grooves becoming heavily soiled
  • Greasy step surfaces
  • Sticky or dirty handrails
  • Chemical residue on surfaces
  • Scratched decorative finishes from abrasive cleaning
  • Water entering areas where excessive moisture should be avoided

Schindler Australia notes that escalator steps can become greasy and slippery as contamination accumulates over time.

Poor presentation also matters commercially. Elevators and escalators often sit in prominent shared areas such as entrances, lobbies, shopping floors and transport zones. Visible neglect can affect how staff, tenants, customers and visitors perceive the overall condition of the property.

When Is Professional Elevator and Escalator Cleaning Needed?

Professional cleaning is most useful when routine janitorial cleaning cannot safely or effectively remove accumulated dirt from detailed surfaces and escalator components.

a man is cleaning dirty elevator and escalator

Heavy Dirt Has Built Up on Steps, Tracks or Surfaces

Professional attention may be appropriate when dirt has become embedded rather than sitting loosely on the surface.

Typical signs include:

  • Darkened escalator grooves
  • Greasy treads
  • Heavy staining
  • Repeated floor marks
  • Dirty risers
  • Persistent grime around edges

High-Touch Areas Require Frequent Cleaning

Busy facilities may require a structured cleaning schedule for handrails, buttons and other frequently touched areas.

This is particularly relevant in:

  • Shopping centres
  • Hospitals
  • Corporate buildings
  • Airports
  • Hotels
  • Universities
  • Transport facilities
  • Large public buildings

KONE and Schindler both identify buttons and handrails as important high-contact surfaces.

General Cleaning Cannot Reach Escalator Treads and Grooves

Standard mops and cloths cannot effectively reach deep into narrow escalator step grooves.

Dedicated step-cleaning equipment can provide more controlled agitation and soil removal.

Specialist cleaning may therefore be necessary even when the surrounding escalator surfaces are already included in routine commercial cleaning.

Incorrect Cleaning Products Could Damage Equipment Surfaces

Professional cleaning is useful when the site contains multiple sensitive finishes and facility staff are uncertain about chemical compatibility.

This may include:

  • Brushed stainless steel
  • Coated metal
  • Rubber handrails
  • Laminates
  • Touch screens
  • Decorative wall panels
  • Specialty flooring

Manufacturer or maintenance-provider guidance should be checked when product compatibility is uncertain.

The Building Has High Daily Foot Traffic

High passenger volumes increase both surface contact and the amount of dirt carried onto elevator floors and escalator steps.

Commercial escalators are specifically designed for demanding environments such as retail facilities and transport hubs, where passenger volume can remain high for long operating periods.

In these environments, cleaning should be planned rather than left until surfaces become visibly heavily soiled.

Frequently Asked Questions About Elevator and Escalator Cleaning

Can Regular Commercial Cleaners Clean Elevators and Escalators?

Yes, trained commercial cleaners can clean accessible elevator and escalator surfaces, but they should not perform mechanical maintenance or access internal machinery.

Routine work may include elevator floors, doors, walls, buttons, mirrors, handrails, escalator balustrades and surrounding landing areas.

Specialist escalator step cleaning may require dedicated equipment and additional access controls.

Can You Use Normal Cleaning Chemicals on Elevator Surfaces?

Not every general cleaning product is suitable for an elevator.

The correct product depends on whether the surface is stainless steel, glass, painted metal, laminate, rubber, stone or another finish. Products should also be used carefully around buttons and electronic components.

Manufacturer recommendations should be followed where available.

Can Escalator Steps Be Deep Cleaned Without Removing Them?

Yes. Specialist systems can clean escalator step treads and risers while the steps remain installed.

Schindler Australia’s professional step-cleaning process specifically describes cleaning both surfaces without physically removing the steps from the escalator.

The appropriate method still depends on the escalator model, condition and manufacturer requirements.

Can an Escalator Be Cleaned While It Is Operating?

Manual deep cleaning should not be improvised on an escalator that is operating normally and carrying passengers.

Deep cleaning should follow the equipment manufacturer’s procedures and the site’s plant-safety controls. Specialist step cleaning is commonly scheduled after operating hours.

Some manufacturer-designed automatic handrail sanitation systems operate continuously, but these are engineered systems installed specifically for that purpose.

Does Elevator and Escalator Cleaning Include Mechanical Maintenance?

No. Cleaning and mechanical maintenance are separate tasks.

Cleaning focuses on accessible surfaces and visible contamination.

Maintenance covers components such as:

  • Motors
  • Control equipment
  • Brakes
  • Step chains
  • Drive systems
  • Sensors
  • Internal door mechanisms
  • Elevator shafts and pits

Mechanical work should be completed by appropriately qualified elevator or escalator technicians.

How Long Does Professional Elevator and Escalator Cleaning Take?

Cleaning time depends on the equipment size, soil level, number of units and whether routine or deep cleaning is required.

A routine elevator clean may be completed as part of a building’s normal commercial cleaning schedule. Escalator step cleaning usually takes longer because every tread and riser requires detailed treatment.

As one manufacturer-specific example, Schindler Australia states that an average escalator may take approximately 6 to 7 hours for its first specialist step clean using its documented process. This should not be treated as a universal industry duration because equipment size, condition and cleaning method vary.

Picture of Jack

Jack

Jack Xiao is the Founder and Managing Director of Office Clean AU, with over a decade of hands-on experience in commercial cleaning. His expertise includes site-specific cleaning plans, workplace hygiene, quality control and reliable service delivery for offices, medical facilities, schools, gyms and warehouses across Melbourne and Sydney.

latest posts

Related Blog

Blue circular popup background graphic for website design

Schedule a Service Today